Selection Guide for Mounting Rails
Choosing the Right Mounting Rail for Photovoltaic Systems
Choosing the right base and module rail is crucial for an optimal substructure of the photovoltaic system. We are happy to advise you personally and would like to provide you a brief summary in advance:
Mounting Rails
The connection of roof hooks, hanger bolts, etc., for Mounting Rails Eco, Medium, and Large is always easily accessible from the front and from above.
Mounting Rail Large
- Optimized for low wind or snow loads (up to approximately 0.8 kN/m²).
- Span width up to approx. 0,8m
- Usable as a base or module rail
Mounting Rail Medium
- Optimized for medium wind and snow loads (0.8kN/m² – 1.4kN/m²)
- Optimized for medium span widths of 0,8 to 1,4m
- Usable as a base or module rail
Mounting Rail Large
- Optimiert für hohe Wind- und Schneelasten (>1,4kN/m²)
- Large span widths (>1,4m)
- Usable as a base or module rail
All values are to be considered as guidelines. We are happy to assisit you with the selection of the correct mountin rail!
Mounting Rail Direct & Mounting Rail Direct Bridges
Photovoltaic Mounting Solutions for Sheet Metal Roofs
For metal roof coverings, we recommend the Mounting Rail Direct and the Mounting Rail Direct Bridges.
Mounting Rail Direct
The AVE and ASE series aluminum roof hooks are suitable for all load-bearing requirements. The following height adjustments can be realized:
Mounting Rail Direct Bridge
The AVE and ASE series aluminum roof hooks are suitable for all load-bearing requirements. The following height adjustments can be realized:
